Holding Tanks

Holding tanks 'hold' the discharged effluent until such time that it can be pumped out, and discharged offsite.
System loading and the frequency between pump outs (Calculator), determines the size of Holding tank required.
(see above for tank sizes available)

The use of holding tanks is applicable in areas that are unsuitable to discharge effluent to ground.

Reasons may include:

• Areas of very high rainfall
• Areas with very close proximity to water sources (eg. creeks & dams)

Standard: Float level indicator (rod & ball float unit)
Optional: Visual Alarm light kit

Holding tanks operate for long periods with little or no liquid
in them. Therefore it is critical that they be correctly installed

See 'Hold down options' for the correct way to install and hold-down tanks.

Installation Instructions

Tank sizes available